Samsung EC-S1050SDA-DE - Manual (Page 31)

30 _RECORDING
Ê Selecting the self-timer
1. Rotate the Mode dial to select a desired
RECORDING mode.
2. Press the SELF-TIMER / RIGHT ( ✢ ) button
until the desired mode indicator displays on the
LCD monitor. A 10 second, 2 second, Double
self-timer or Motion timer icon appears on the
LCD monitor.
3. When you press the SHUTTER button, the
picture will be taken after the specifi ed time
has elapsed.
Self-timer ( ✢ ) / Right button
[Selecting the 10 SEC
self-timer]
Ê Self-timer mode indecator
Icon Mode Description
✢
10SEC
self-timer
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
✡
2SEC
self-timer
Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
✣
Double
self-timer
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken. When
using the fl ash, the 2-second self-timer may be
delayed for longer than 2 seconds depending on
the fl ash charging time.
]
Motion
Timer
The camera detects the subject's movement 6
seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
When the menu is displayed on the LCD monitor, pressing the Right but-
ton makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer ( ✢ ) button. This function is used when the
photographer would also like to be in the image.
å If you operate the Self-timer button during the self-timer operation,
the self-timer function is cancelled.
å Use a tripod to prevent the camera from shaking.
å In Movie Clip mode, only the 10SEC self-timer will work.