Samsung EC-S1050SDA-DE - Manual (Page 49)

48 _SETUP
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or
TV, etc.) to which the camera is connected. PAL mode can support only
BDGHI.
Ê Connecting to an external monitor
When the camera is connected to an exter-
nal monitor, the image and menus on the
LCD monitor will be visible on the external
monitor and the LCD monitor of the camera.
Selecting Video out type
Yellow - Video
White - sound
SETTINGS
File 
Format 
Reset 
PAL
NTSC
Back Set OK 
Imprint 
Power Off 
Video Out 
This function switches the camera off after a set amount of time in order
to prevent unnecessary battery drainage.
- Sub menus
[Off] : The power off function will
not operate.
[1, 3, 5, 10 min] : The power will turn off
automatically if not used
for the period of time
specifi ed.
- After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
Auto power off
Settings ( ” )
SETTINGS
Imprint 
Format 
File 
5 min
Back Set OK 
Video Out 
Reset  Off
Power Off 
1 min
10 min
3 min