Samsung LNT2353HX-XAA - Manual (Page 18)

English - 6
Viewing the menus
. With the power on, press the mEnu button.
The main menu appears on the screen. The menu’ s left side has five icons:
Picture, Sound, Channel, Setup, Input.
. Use the ▲ or ▼ buttons to select one of the five icons.
Then press the EntEr button to access the icon’s sub-menu.
. Press the ExIt button to exit.
The on-screen menus disappear from the screen after about one minute.
Input
Source list : tV ►
Edit name ►
WISElInK
anynet+ (hdmI-CEC)
tV
move Enter Exit
memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the available
channels are memorized, use the Ch or Ch buttons to scan through the channels. This eliminates the need to change
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, memoriz-
ing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to
the TV (i.e. an Air or a Cable system).
. Press the mEnu button to display the menu.
Press the ▲ or ▼ buttons to select “Channel”, then press the
EntEr button.
. Press the EntEr button select “Antenna”.
Press the ▲ or ▼ buttons to select “Air” or “Cable”, then press the EntEr button.
Press the ExIt button to exit.
antenna : air ►
auto program ►
Clear Scrambled Channel ►
Channel list ►
name ►
fine tune ►
Signal Strength ►
lna : on ►
Channel
move Enter return
tV
Channel
move Enter return
tV
antenna : air
auto program
Clear Scrambled Channel
Channel list
name
fine tune
Signal Strength
lna : on
air
Cable
BN68-01156B-02Eng-0329.indd 16 2007-03-29 �� 7:58:39