Samsung LNT2353HX-XAA - Manual (Page 69)

English - 6
WISElInK
If you enter the WISELINK mode with no USB device connected. the message “There is no device connected” will appear. In
this case, insert the USB device, exit the screen by pressing the WISELINK button on the remote control and enter the
WISELINK screen again.
Photo and audio files must be named in English, French, or Spanish. If not, the files can not be played. Change the file
names to English, French,or Spanish if necessary.
The file system only supports FAT16/32 (The NTFS file system is not supported)
Certain types of USB devices may not be compatible with this TV.
Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
Recommended image resolution for Wiselink is 600 mega pixels.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
Only MP3 and JPEG file formats are supported.
We recommend the sequential jpeg format. Progressive jpeg uses a lot of memory and decoding may fail.
Do not disconnect the USB device while it is “loading.”
Neither PTP (Picture Transfer Protocol) nor MTP (Media Transfer Protocol) is supported.
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found
at the start of the file
The higher the resolution of the image, the longer it takes to display on the screen.
If the horizontal resolution of an image is higher than 5000, it cannot be decoded.
If the vertical resolution of an image is higher than 4000, it cannot be decoded.
using the WISElInK function (ln-t5h, ln-t05h)
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class
(MSC) device.
Press the poWEr button on the remote control or front
panel. Connect a USB device containing JPEG and/or
MP3 files to the WISELINK jack (USB jack) on the
side of the TV.
TV Side Panel
Example
using the remote Control button in WISElInK menu
button operations
Move the cursor and select an item
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Return to the previous menu
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Stop the current function and return to the previous high-level menu.
BN68-01156B-02Eng-0329.indd 67 2007-03-29 �� 8:00:30