American Audio DCD-PRO240 - Manual (Page 5)

PRODUCT INFORMATION
I. Heat - The CD player should be situated away
from heat sources such as radiators, heat regis-
ters, stoves, or other appliances (including ampli-
fiers) that produce heat.
2. Do not let insecticides, benzene, or thinner
come in contact with the surface of the unit.
3. Never disassemble or modify your unit in any
way, doing so will void your manufactures war-
ranty.
4. Never plug this unit in to a dimmer pack
5. Do not attempt to operate this unit if it becomes
damaged in any way.
6. This unit is intended for indoor use only, use of
this product outdoors voids all warranties.
7. Always mount this unit in safe and stable
matter.
8. Disconnect from main power before making
any type of connection.
9. Cleaning -
• The CD Player should be cleaned only as
recommended by the manufacturer. Use a
soft cloth to wipe down the outside of the
unit. For stubborn stains moisten a soft cloth
with class cleaner or other mild detergent to
wipe away any stains. Use a soft cloth to
wipe any residual cleaner. Never use volatile
cleaners such as benzene, solvent, or thinner
to clean your unit, these cleaners will damage
the units surface.
• Cleaning the pick-up lens - The pick-up lens
should not become dirty under normal us-
age. If the lens does become dirty, contact
American Audio Technical Support for further
instructions. Third party lens cleaners avail-
able but not highly recommended. Use of
some of these cleaner may damage the pick-
up lens, be sure to follow extreme caution
when using these types of cleaners.
© American Audio ® - www.AmericanAudio.us - DCD-PRO240™ Instruction Manual Page 5
This unit has been thoroughly tested and has
been shipped in perfect operating condition.
Carefully check the shipping carton for damage
that may have occurred during shipping. If
the carton appears to be damaged, carefully
inspect your unit for any damage. Be sure all
accessories needed to operate the unit has
arrived intact. In the event damage has been
found or parts are missing, please contact our
toll free customer support number for further
instructions. Please do not return the unit to
your dealer without first contacting customer
support.
LINE VOLTAGE SELECTION
• The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear
panel (using a flat head screw driver).
• Do not force the VOLTAGE SELECTOR
switch as this may cause damage
• If the VOLTAGE SELECTOR switch does
not move smoothly, please contact a quali-
fied service technician.
WARRANTY INFORMATION
The DCD-PRO240™ carries a TWO year (730
days) limited warranty. This warranty covers
parts and labor. Please fill out the enclosed
warranty card to validate your purchase and
warranty. All returned service items whether
under warranty or not, must be freight pre-
paid and accompany a return authorization
(R.A.) number. If the unit is under warranty,
you must provide a copy of your proof of pur-
chase invoice. Please contact American Audio
®
customer support at (800) 322-6337 for a R.A.
number.
Voltage Line Selector Switch
CONNECT TO CONTROL 2 CONNECT TO CONTROL 1
SCRATCH BOX INPUT
115V 230V RISK OF ELECTRICAL SHOCK DO NOT OPEN
CAUTION
DIGITAL OUT SCRATCH BOX INPUT DIGITAL OUT
AUDIO OUT
L R
AUDIO OUT
L R Voltage Selector
AC INPUT 115/230 V, 50/60 Hz
2 1