Samsung SMX-C20RN-XAA - Manual (Page 97)

83
Version
The version information can be changed without the prior notice.
1. Press the Control button ( / ) "Version" OK button.
The version information displayed on the LCD screen.
2. Press the MENU button to exit the menu.
•
Demo
Demonstration automatically shows you the major features of your camcorder so that you can use them more
easily.
1. Press the Control button ( / /OK) "Demo" "On."
If you don't want this function, select "Off."
2. Press the MENU button to exit the menu.
The Demo function starts on the LCD screen.
•
•
The Demo mode is cancelled in the following case:
- If any button is pushed. (Recording start/stop, Photo
, SMART AUTO , etc.)
However, if Demo mode is set to On, the camcorder will will enter Demo mode automatically if it is in
STBY mode and idle for 5 minutes without operation. If you don’t want the Demo function to start, set
"Demo" to "Off".
- In STBY mode, holding the MENU button for 5 seconds activates Demonstration mode which starts a
demo immediately without your setting "Demo: on."
Submenu items
Off: Disables the function.
On: Activates demonstration mode and shows various features on
the LCD screen.
•
•
The Demo function does not operate in the following cases:
- If "Auto Power Off" is set to "5 Min" (uses the battery as main power), the Auto Power Off
function will turn the camcorder off before Demo can run.
Using the Shop Mode
For enhanced performance, the version information can be changed
without prior notice.
Samsung Electronics Co., LTD.
S/W 1.00, JAN 15 2010, 18:08:47
Version
Exit OK
Settings
Language
Default Set
Version
Exit
STBY 0:00:00 [475Min]
Select
Settings
Demo
Version
Language
Exit
STBY 0:00:00 [475Min]
Select
:
Settings
Demo
Version
Language
Off
On
Exit Move Select
STBY 0:00:00 [475Min]