Samsung SC-D383-XAP - Manual (Page 21)

臺灣 _17 17_ English
有關電池組的注意事項
請參考第 15 頁的表、以獲知大約的連續錄製時間。
錄製時間會受溫度和環境條件的影嚮。
由於環境溫度和條件會經常改變、因此錄製時間在寒冷的環境溫度
下會急速縮短。
操作說明中提供的連續錄製時間是根據在
25 °C (77 °F) 溫度下使用
完全充電的電池組所測得的結果。剩餘的電池時間可能會與說明中
提供的大約連續錄製時間有所不同。
在購買新的電池組時、我們建議您購買與攝錄放影機隨附的電池組
相同的電池組。可以到
SAMSUNG 零售商購買電池組。
在電池到達其使用壽命時、請與當地經銷商聯絡。
電池應該作為化學廢物處理。
開始拍攝之前、請確定電池組已經完全充電。
全新的電池組並未經過充電。使用電池組之前、您必須將它完全充電。
完全放電的電池組可能會導致漏液。 電池組完全放電時、可能會損
壞內部元件。
為節省電池電量、在不使用時關閉攝錄放影機電源
若攝錄放影機處於
Camera（錄製）模式、並在插入錄影帶的情況下、
留在 STBY（待機）模式不操作超過 5 分鐘、它將自動關閉以避免不必
要的電池放電。
切勿讓電池組掉落。掉落的電池組可能會損壞。
•
•
•
•
•
•
•
•
•
•
•
•
連接電源
有兩種電源類型可以連接到攝錄放影機。
- 交流電源適配器：用於室內拍攝。
- 電池組：用於戶外拍攝。
使用家中電源
使用家用電源為攝錄放影機供電、就不必經常擔心電
池電量的多寡。
您可以讓電池組留在設備中、電池電量將不會消耗掉。
1. 向下滑動
POWER 開關以關閉電源。
. 打開插孔護蓋、然後將 AC 電源適配器連接到 DC
IN 插孔。
3. 將 AC 電源適配器連接到牆上插座。
牆上插座和插頭類型會因不同的國家而異。
4. 向下滑動 POWER 開關以開啟電源、然後按下 MODE 按鈕以設定
Camera ( ) 或 Player ( ).
•
•
Notes regarding the Battery Pack
Please refer to the table on page 15 for approximate continuous recording time.
The recording time is affected by temperature and environmental conditions.
The recording time shortens dramatically in a cold environment, as the
environmental temperature and conditions vary.
The continuous recording times in the operating instructions are
measured using a fully charged battery pack at 25 °C (77 °F). The
remaining battery time may differ from the approximate continuous
recording times given in the instructions.
When purchasing a new battery pack, we recommend buying the
same battery pack that is provided with this camcorder. The battery
pack is available at SAMSUNG retailers.
When the battery reaches the end of its life, please contact your local
dealer.Batteries should be handled as chemical waste.
Make sure that the battery pack is fully charged before starting to record.
A brand new battery pack is not charged. Before using the battery pack,
you need to charge it completely.
The battery pack may be prone to leakage when fully discharged.Fully
discharging a battery pack damages the internal cells.
To preserve battery power, keep your camcorder turned off when you are
not operating it.
If your camcorder is in Camera mode, and it is left in STBY mode without
being operated for more than 5 minutes with a tape inserted, it will
automatically turn itself off to protect against unnecessary battery discharge.
Do not drop the Battery Pack. Dropping the battery pack may damage it.
•
•
•
•
•
•
•
•
•
•
•
•
CONNECTING A POWER SOURCE
There are two types of power source that can be
connected to your camcorder.
- The AC Power Adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the
camcorder without having to worry about the battery
power. You can keep the battery pack attached; the
battery power will not be consumed.
1. Slide the POWER switch downwards to turn off the
power.
2. Open the jack cover and connect the AC power adaptor to the DC IN jack.
3. Connect the AC power adaptor to a wall socket.
The plug and wall socket type may differ according to your resident
country.
4. Slide the POWER switch downwards to turn on the power and press the
MODE button to set Camera( ) or Player( ).
•
•
MODE
AV DV
POWE R
CHG
VOL
POWER
3
1