Analog Devices SHARC Processors 82-003536-01 - Manual (Page 50)

Evaluation Tools
2-20 Getting Started With SHARC Processors
• Headphone jack (connected to one of the stereo outputs)
• SPDIF In RCA jack
• SPDIF Out RCA jack
• ADM1032 two-wire sensor
• ADM3202 RS-232 line driver/receiver
• USB standalone debug agent
• USB 2.0 interface
• JTAG ICE 14-pin header
• Evaluation suite of VisualDSP++ development tools
• Flash programmer utility for downloading boot code to on-board
flash memory
• SHARC expansion interface II with connectors supporting EBIU,
Flags/IRQs, DAI, DPI, PWR_IN, 3.3 V, GND
• 8 LEDs: 1 power (green), 1 board reset (red), and 6 general-pur-
pose (amber)
• 5 push buttons: 1 reset, 2 connected to DAI, 2 connected to
IRQ/Flag
• 2 link port connectors
• DMAX connector for probing
• USB cable
• CE certified