Samsung DVD-V9700-XAA - Manual (Page 53)

ENG- 53
D V D O P E R AT I O N S
Audio Options
Note
Even when PCM Down sampling is Of f,
some discs will only output down sampled
audio through the digital outputs.
Dolby Digital Out
- PCM: Converts to
PCM(2CH) audio.
- Bitstream: Outputs Dolby
Digital via the digital
output.
Dynamic Compression
- On: When the movie-
soundtracks are played at
low volume or from smaller
speakers, the system can
apply appropriate compression
to make low-level content more
intelligible and prevent dramatic
passages from getting too loud.
- Off: To select the standard
range.
PCM Down Sampling
- On: Select this when the
Amplifier connected to the
player is not 96KHz
compatible. In this case, the
96KHz signals will be
converted down to 48KHZ.
- Off: Select this when the
Amplifier connected to the
player is 96KHz compatible.
In this case, all signals will
be output without any
changes.
▼
- Dynamic compression restrains the
dynamic range of the sound, i.e. the
difference between the loud and
quiet passages of a DVD audio track.
This is useful when watching a DVD
late at night.
DTS
- Off : Does not output a
digital signal
- On: Outputs DTS Bitstream
Digital via digital output
only. Select DTS when
connecting to a DTS
Decoder.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Note
There is no analog audio output when you
set DTS to on.
01304D_V9700_XAA_Eng2 2/22/07 9:15 AM Page 53