Samsung DVD-V9700-XAA - Manual (Page 56)

ENG-56
D V D O P E R AT I O N S
HDMI
This setting is used when the
DVD-VCR is connected by
HDMI to Display devices (TV,
projector, etc).
Resolution
- 480p : 720 x 480
- 720p : 1280 x 720
- 1080i : 1920 x 1080
Format
This feature can be used to fine-tune the HDMI output of this
DVD-VCR unit to your TV or Monitor for the best color
reproduction.
When connected via HDMI, you can change the HDMI output
format. The HDMI output format allows you to set the HDMI
data format and picture status settings depending on the
display system in use.
- RGB-Normal : TV Connection.
Most TVs with HDMI input (Plasma TV, LCD
TV, Projector, Projection TV, CRT TV etc)
support this format.
This mode delivers enhanced contrast and
enables better color reproduction.
- RGB-Expand : Monitor Connection.
This mode is usually used when connected
to a Monitor.
- YCbCr-(4:4:4) : TV Connection.
Most TVs with HDMI input (Plasma TV, LCD
TV, Projector, Projection TV, CRT TV etc)
support this format.
This mode also delivers enhanced contrast
and enables better color reproduction.
- YCbCr-(4:2:2) : TV Connection.
This mode is rarely used and is not
supported by most TVs.
This mode delivers enhanced contrast, but
the picture quality is poorer than YCbCr-
(4:4:4).
If the HDMI output mode is set incorrectly, the screen
brightness and color may be distorted. If the selected HDMI
format is not supported by your TV, the picture may be
distorted.
Resolution Setting
- Auto : Resolution setting automatically
- Manual : Resolution setting Manually.
01304D_V9700_XAA_Eng2 2/22/07 9:15 AM Page 56