Samsung SGH-T439ZBATMB User Manual
Page 95
Fun & Apps
95
Voice commands
4.
At the voice prompt, press the Settings soft key, select Sensitivity and
press the Select soft key or the
key.
5.
Use the Up or Down Navigation keys to adjust the selected Sensitivity
setting to Reject More spoken commands or names or to Reject Less
spoken commands or names.
6.
Press the OK soft key to accept the new setting.
Digit dialing
If Voice Command frequently does not recognize your commands, adapting digit
dialing to your voice improves the accuracy of digit recognition.
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not
able to use the handset with Voice Command unless the handset is reset to factory
defaults.
Adapting requires recording multiple sequences of digits. The entire adaptation
process takes approximately one minute.
Adapting Digit Dialing Tips
•
Select a quiet location when using the Adapt Digits feature.
•
Wait for the beep (tone) before you begin speaking.
•
Say each digit with a clear tone.
•
Re-record the sequence if you make a mistake or if there is noise interference.
•
Adapt digits only if you regularly experience issues with digit dialing.
Select location
This option allows you to identify the country or region where you are using the
handset.
Adapt Digits
To adapt digits perform the following:
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Fun & Apps and press the Select soft key or the
key.
3.
Highlight Voice recognition and press the Select soft key or the
key.
4.
At the voice prompt, press the Settings soft key, select Digit dialing and
press the Select soft key or the
key.
5.
Highlight Adapt digits and press the Select soft key or the
key.