Samsung HPP3761X-XAC - Manual (Page 50)

50
Selecting a Signal Source (Antenna or
Cable) for PIP
If the PIP source is TV while PIP is ON, you can select a different broadcasting source
for the PIP picture from the main picture.
1 Press the MENU button. Press the ▲ or ▼ button to
select “Picture”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “PIP”, then press
the ENTER button.
3 Press the ▲ or ▼ button to select “Air/CATV”, then
press the ENTER button.
4 If an antenna is connected, the setting is “Air”. If a
Cable TV system is providing the signal, press the
▲
or ▼ button until the appropriate type of cable
system is selected (“STD”, “HRC” or “IRC”).
5 Press the MENU button to exit the menu.
Mode : Dynamic √
Custom √
Color Tone : Normal √
Film Mode : Off √
Size : 16:9 √
PIP √
DNIe : On √
My Color Control √
Picture TV
Move Enter Return
PIP : On √
Source : TV √
Swap √
Size : √
Position : √
Air/CATV : Air √
Channel : 4 √
Sound Select : Main √
PIP TV
Move Enter Return
PIP : On
Source : TV
Swap
Size
:
Position :
Air/CATV : Air
Channel : 4
Sound Select : Main
PIP TV
Move Enter Return
PIP : On
Source : TV
Swap
Size
:
Position :
Air/CATV : Air
Channel : 4
Sound Select : Main
PIP TV
Move Enter Return
Air
STD
HRC
IRC
Air
STD
HRC
IRC