Samsung LT22A350ND-ZA - Manual (Page 99)

▶ ◀ ▶
English
The connected device is not
displayed.
• Check whether or not the device supports Anynet+ functions.
• Check whether or not the HDMI cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
• Search Anynet+ devices again.
• Anynet+ requires an HDMI connection. Make sure the device is
connected to your TV with an HDMI cable.
• Some HDMI cables may not support Anynet+ functions.
• If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat the
device scan.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.