Samsung HPS5073X-XAA - Manual (Page 13)

English-13
/
T
D
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output jack on the external device.
1. Connect an HDMI Cable
between the [HDMI1/DVI IN]
or [HDMI IN 2] on the TV and
the HDMI OUT on the DVD
player/Set-Top Box or
connect a DVI to HDMI Cable
or DVI-HDMI Adapter
between the [HDMI1/DVI IN]
jack on the TV and the DVI
jack on the DVD player/Set-
Top Box.
If connecting via HDMI/DVI,
you must also connect audio
cables. Connect Audio
Cables between the DVI IN
[R-AUDIO-L] jacks on the TV
and the AUDIO OUT jacks on
the DVD player/Set-Top Box.
DVD Player/Set-Top Box
TV Rear Panel TV Rear Panel
HDMI Cable (Not supplied)
What is HDMI?
• HDMI, or high-definition multimedia interface, is a next-generation interface that enables
the transmission of the digital audio and video signals using a single cable without
compression.
• “Multimedia interface” is a more accurate name for it especially because it allows
multiple channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi-channel digital audio.
➢
Each DVD player/Set-top box has a different back panel configuration.
➢
When connecting a DVD player/Set-top box, match the color of the connection terminal to the cable.
➢
When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio
cables when connecting via HDMI/DVI.
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1. Connect an Optical or
Coaxial Cable between the
DIGITAL AUDIO OUT
(OPTICAL or COAXIAL)
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
“DIGITAL AUDIO OUT
(OPTICAL or COAXIAL)”
terminal:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
system’s volume control.
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
Coaxial Cable (Not supplied)
What is OPTICAL?
• Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF
is a transmission system of digital audio in the form of a light wave that uses a glass conductor.
What is COAXIAL:?
• The digital audio signal is received through a coaxial copper cable.
➢
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
➢
Each external input source device has a different back panel configuration.
or
DVI to HDMI Cable (Not supplied)
Audio Cable
(Not supplied)
1
BN68-01094L-00Eng 8/7/06 1:44 PM Page 13