Samsung HPS5073X-XAA - Manual (Page 53)

English-53
Displaying CableCARD related information
This menu works with a CableCARD provided by a local cable service provider.
Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV.
Accessing information on Status, Pairing and Network Setup of the CableCARD is provided by the service provider in
CableCARD menu.
1. Make sure the Cablecard is inserted.
Press the MENU button.
Press the …
… or † † button to select “Setup”, then press the ENTER button.
2. Press the … … or † † button to select “CableCARD TM ”, then press the ENTER button.
Press the EXIT button to exit.
… More
Energy Saving : Standard √
Screen Burn Protection √
PC √
Function Help : On √
Blue Eye : On √
CableCARD TM √
CableCARD TM Setup √
Setup T V
Move Enter Return
1. Insert the CableCARD into
the “CableCARD” slot and
the message “CableCARD
TM
Inserted” is displayed on the
screen. If the channel
information does not exist,
the message “Updating
Channel List” is displayed
during channel information
configuration. It could take
several minutes to update
the channel information
depending on your cable
service provider.
2. The pairing information
containing a telephone
number, CableCARD ID,
Host ID, and other
information will be displayed
in about 2~3 minutes. If an
error message is displayed,
please contact your service
provider.
3. When the channel
information configuration
has finished, the message
“Updating Completed” is
displayed, indicating that
the channel list is now
updated.
4. The Channel list can now
be displayed by pressing
CH LIST button.
TV Rear Panel
From cable TV
Please insert the card as shown.
➢
Once the channel list has been updated, only the channels on the channel list can be
selected.
➢
Remove the CableCARD by carefully pulling it out with your hands since dropping the
CableCARD may cause damage to it.
Using CableCARD
You must obtain a CableCARD from a local cable service provider.
BN68-01094L-00Eng 8/7/06 1:45 PM Page 53