Samsung HPS5073X-XAA - Manual (Page 15)

English-15
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢
It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed.
Press the ENTER button, then “Select Home Mode when installing this TV at
home.” menu is automatically displayed.
2. Press the œ or √ button to select “Shop” or “Home”, then press the ENTER
button. “Select the language of the OSD” menu is automatically displayed.
➢
The default selection is “Home”.
➢
We recommend setting the TV to Home mode for the best picture in your home
environment.
➢
Shop mode is only intended for use in retail environments.
➢
If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side
panel of the TV for five seconds to return to Dynamic (Home) mode.
3. Press the ENTER button to enter the language.
Press the … … or † † button to select language, then press the ENTER button.
“Select the antennas to memorize.” menu is automatically displayed.
4. Press the … … or † † button to memorize the channels of the selected connection.
Press the ENTER button to select “Start”.
➢
If the antenna is connected to ANT1 IN(AIR), select “Air” and if it is connected to
ANT2 IN(CABLE), select “Cable”.
➢
If both ANT1 IN(AIR) and ANT2 IN(CABLE) are connected, select the “Air + Cable”.
➢
In Cable mode, press the … … or † † button to select "Digital Channel" or "Analog Channel",
then press the ENTER button. You can select the correct signal source among "STD",
"HRC" and "IRC" by pressing the …
… or † † button, then press the ENTER button.
To memorize the channels, press the … … or † † button to select "Start", then press the
ENTER button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
Operation
Menu language, Channels
and Time will be set. i
Start
Select the language of the OSD.
Menu Language :
Plug & Play
Enter Skip
English
Spanish
French
Move
Select Home Mode when installing this TV at home.
Plug & Play
Enter Skip
Shop Home
Move
Select the antennas to memorize.
Air
Cable
Air + Cable
Plug & Play
Enter Skip Move
Start
Start
Select the cable system.
Digital Channel : STD √
Analog Channel : STD √
Start
Plug & Play
Enter Skip Move
Start
Continued...
BN68-01094L-00Eng 8/7/06 1:44 PM Page 15