Samsung HW-D650S-ZA - Manual (Page 36)

36
English
Setup
Connection Setting For Surround Back
Settings for the surround back speaker differ depending on the connection method and installation site
of the speaker to be connected. You must confi gure the 7.1 CHANNEL settings according to the
connected speaker before you listen to music properly.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select SPEAKER, and then press the
ENTER button.
Press the ▲▼ buttons to select 7.1 CHANNEL, and then
press the ENTER button.
Press the ▲▼ to select a proper setting for the surround back
speaker.
SURR.BACK : Select this if you want to install the surround
back speaker in the default settings. With this setting, you can
enable the Dolby Pro Logic IIx mode.
PLIIz : Select this if you want to install the surround
back speaker in the top front corner. With this
setting, you can enable the Dolby Pro Logic IIz
mode.
NOTE
Depending on the 7.1 CHANNEL settings, the surround back speaker or front height speaker
menus may not be activated or may differ in the speaker menu:
SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE.
Depending on your setting, you may not use different features simultaneously.
If you set SURR-BACK, for instance, you cannot use the following feature: PLIIz.
1.
•
2.
3.
4.
•
•
✎




SPEAKER SIZE
7.1 CHANNEL
SPEAKER DISTANCE
SPEAKER LEVEL
TEST TONE
INPUT
SPEAKER
SURROUND
OPTION
> MOVE SELECT ' RETURN EXIT
Q
SURR.BACK
PLIIz
HW-D600_D650S_XAA_0616.indd 36 HW-D600_D650S_XAA_0616.indd 36 2011-06-16 10:27:56 2011-06-16 10:27:56