Samsung HW-D650S-ZA - Manual (Page 44)

44
English
Setup
Auto Calibration Setup
By setting the calibration just once when you relocate or install the unit, you can have the unit
automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create a 5.1-channel sound fi eld optimized for your environment.
- Before Setting -
Plug the ASC microphone into the ASC MIC jack.
Place the ASC microphone at the listening position.
Press the ASC button on the front panel, and then press the ENTER button.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select OPTION, and then press the
ENTER button.
Press the ▲▼ buttons to select AUTO CALIBRATION, and
then press the ENTER button.
Press the ▲▼ buttons to select MEASUREMENT, and then
press the ENTER button.
To create the optimal 5.1 channel sound fi eld, the selections
are in the following sequence:
L
➞ C ➞ R ➞ SR ➞ SBR ➞ SBL ➞ SL ➞ SW
MODE ON : The auto calibration mode is set to on.
MODE OFF: The auto calibration mode is set to off.
To cancel the Auto Calibration setup.
This will be automatically reverted if you
press the RETURN button.
If auto calibration error occurs, see "Auto
Calibration Error List" on page 58.
1.
2.
3.
1.
•
2.
3.
4.
•
•
•
ASC
Microphone


> MOVE SELECT ' RETURN EXIT
CALIBRATION
FL
0dB
0.3m
SL
0dB
0.3m
SBL
0dB
0.0m
SBR
0dB
0.0m
SR
0dB
0.3m
FR
0dB
0.3m
C
0dB
0.3m
SW
0dB
0.3m
USER
HW-D600_D650S_XAA_0616.indd 44 HW-D600_D650S_XAA_0616.indd 44 2011-06-16 10:28:00 2011-06-16 10:28:00