Samsung HW-D650S-ZA - Manual (Page 18)

18
English
Connections
NOTE
Speakers are provided with model HW-D650S only. Model HW-D600 does not come with
speakers. Contact a Samsung Electronics retailer for purchasing.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands
or objects into the duct (hole).
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
If you want to use a active subwoofer speaker (not supplied), connect a subwoofer speaker into
the SUBWOOFER OUT terminal in the rear panel.
By using an external amplifi er, you can connect the surround back speakers (SBL/SBR) or front
height speakers(FHL/FHR) to improve your system up to a 7.1 channel system.
✎






Attaching the Toroidal Ferrite Core to the Speaker Cable
Open the toroidal ferrite cores by pulling the lock lever.
Arrange all the speaker cables that are connected to the unit and make a loop.
Attach the ferrite core as close as possible to the unit.
Place the toroidal ferrite core on the looped speaker cable as shown, and then press it closed it
until you hear a click.
1.
2.
•
3.
SURROUND
BACK OUT
SUBWOOFER OUT
SURROUND
BACK OUT
SUBWOOFER OUT OUT
HW-D600_D650S_XAA_0616.indd 18 HW-D600_D650S_XAA_0616.indd 18 2011-06-16 10:27:20 2011-06-16 10:27:20