Setting dolby pro logic mode, Surround setup, Setup – Samsung HW-D650S-ZA User Manual

Page 40

Advertising
background image

40

English

Setup

Setting Dolby Pro Logic Mode

This mode provides up to 7.1 channel sound from 2 channel sources, or provides 7.1 channel sound
from 5.1 channel sources for music or movie mode.

Press the PROLOGIC button on the remote control.

MOVIE : Adds realism to the movie soundtrack.

MUSIC : Provides up to 7.1 channel surround sound for digital, analog or existing stereo sources.

GAME : Enhances the excitement of the game’s sound.

MATRIX : You will hear up to 7.1 channel surround sound.

PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.

OFF : Output the original signal as it is without applying the sound fi eld effect or any other sound

effect.

Surround Setup

Setting Dolby Pro Logic IIx

This function works only in Dolby Pro Logic IIx MUSIC mode.

Press the SETUP/MENU button on the remote control.

Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.

Press the ▲▼ buttons to select SURROUND, and then press
the ENTER button.

Press the ▲▼ buttons to select DPLIIx, and then press the
ENTER button.

Press the ▲▼ buttons to select the option you want, and then
press the ENTER button.

PANORAMA : Press the ▲▼ buttons to select ON or OFF.
(This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.)

DIMENSION : Press the ◄ ► buttons to set from -7 to 7.
(Incrementally adjusts the sound fi eld (DSP)from the front or surround.)

C- WIDTH : Press the ◄ ► buttons to set from 0 to 7.
(This sets the width of the center sound image. The higher the setting, the less sound comes
from the center speaker.)

NOTE

PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the Dolby Pro Logic
Mode is set to MUSIC.
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital, Dolly
Digital +, Dolby true HD, DTS, DTS-HD Master Audio.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
When Dolby Pro Logic IIz is set ON, Dolby Pro Logic IIx can not be used.






1.

2.

3.

4.

HW-D600_D650S_XAA_0616.indd 40

HW-D600_D650S_XAA_0616.indd 40

2011-06-16 10:27:58

2011-06-16 10:27:58

Advertising
This manual is related to the following products: