Samsung ER-GX20ZBBB-E1 - Manual (Page 148)

147
Troubleshooting
Error Messages Description
Memory card full
The Memory Card is full and no more images
can be saved. Insert a new Memory Card or delete
unwanted images.
You may be able to save new images by changing
the quality level or recorded pixels.
No image
There are no images for playback on the Memory
Card.
Camera cannot display this image
You are trying to play back an image in a format
not supported by this camera. You may be able
to play it back on another brand of camera or your
computer.
No card in camera The Memory Card is not inserted in the camera.
Memory card error
The Memory Card has a problem, and image
capture and playback are impossible. It may be
viewable on a PC but not the camera.
Card not formatted
The Memory Card you have inserted is
unformatted or has been formatted on a computer
or other device and is not compatible with this
camera. Use after formatting with the camera.
Card locked
A locked Memory Card is inserted in the camera.
Unlock the Memory Card.
Card is locked
Rotation information cannot be
saved
Error Messages Description
This image is protected
Rotation information cannot be
saved
The selected rotated image is protected.
Remove protection from the image.
Cannot use this card
The inserted card cannot be used on a camera.
Insert a usable card.
Battery depleted
The batteries are exhausted.
Recharge the current battery or replace with a new
one.
Not enough battery remaining
to clean sensor
Appears during Sensor cleaning if battery set level
is insuffi cient.
Replace the battery set with a new one or use an
AC adaptor.
Image folder could not be created
The maximum folder number (999) and fi le number
(9999) are being used, and no more images can be
saved.
Insert a new Memory Card or format the card.
The image is not stored
The image could not be saved because of an
Memory Card error.
Settings not stored
The DPOF settings fi le could not be saved because
Memory Card is full. Delete unwanted images and
set DPOF again.
RAW images cannot be set DPOF cannot be applied to the RAW images.