Samsung ER-GX20ZBBB-E1 - Manual (Page 96)

095
Setting the Colour Temperature
5. Press the direction buttons ( ) to fi ne tune
the White Balance. Seven levels and 196
patterns are available on the G-M and B-A
axes.
- G : Green
- M : Magenta
- B : Blue
- A : Amber
GM compensation ▲▼ Adjust the color values between the green and
magenta.
BA compensation ◄► Adjusts the tone of the colours between blue and
amber.
6. Press the OK button.
-The White Balance fi ne tune screen appears.
7. Press the OK button twice.
-The camera is ready to take a picture with the set White Balance.
● If the green button ( ) is pressed
during the White Balance setting, the
White Balance value is set to default
(±0).
● When the COLOR TEMP. UNIT (K1,
K2, K3) is change after selecting the
colour temperature, the following menu
will display. Change the menu with the
front dial ( ) and rear dial ( ).
● Set [Fine tune when AWB] in [CUSTOM1 MENU] to [On] when fi ne-
tuning in AWB.
: Set : Exit
Daylight
AWB
: Set : Check
Daylight
WHITE BALANCE
: Set : Exit
COLOR TEMP. UNIT