Using record on demand key – Avaya 1120E User Manual
Page 132
Working without interruption
132
configuration. Contact your system administrator to learn which treatment
is configured for your IP Deskphone.
Figure 24: Call Deflect Key
If you press the
Deflect
key and no special call treatment has been
configured, your caller receives a busy signal.
Using Record On Demand key
If your call recording server does not support wideband call recording,
you cannot use the call recording feature. For more information, contact
your system administrator.
If this feature is enabled, you can use the Record on Demand (ROD)
feature key to record your telephone conversation.
Press the
ROD
key to start or stop the call recording. This key is
associated with the active user ID and is displayed only if a call is active.
The
ROD
key blinks while it is connecting to the call recording application,
and is lit when the call is recording.
The
ROD
key is displayed in the following scenarios:
•
Normal operation - Press the
ROD
key during an active call to record
the call.
•
Call Recording (CR) application in ROD Mode - Press the
ROD
key
during an active call to record the call.