Advanced recording, Grabación avanzada – Samsung SC-D23-XAA User Manual

Page 63

Advertising
background image

Advanced Recording

63

63

ENGLISH

ESPAÑOL

Grabación avanzada

1. Press the PHOTO button and hold it.

The still picture appears on the LCD monitor.

If you do not wish to record, release the button.

2. Release the PHOTO button and press the PHOTO

button again in 2 seconds.

The still picture is recorded for about 6~7
seconds.

3. After the PHOTO has been recorded, the camcorder returns to

STBY mode.

Searching for a PHOTO picture

The PHOTO SEARCH works in PLAYER mode only.

1.

Press the MENU button. (or press the

PHOTO SEARCH button on the remote
control.)

The MENU list will appear.

2. Turn the MENU DIAL to highlight A/V.
3. Press the ENTER button to enter the sub-menu.
4. Select PHOTO SEARCH from the sub-menu and

press the ENTER button.

5. Search the PHOTO using the

(FF) and

(REW) buttons.

The PHOTO search process appears on the
LCD while you are searching.

After completing the search, the camcorder
displays the still image.

6. To exit, press the

(STOP) button.

PLAYER MODE

INITIAL

WIND CUT
PB DSE

REC MODE
PHOTO SEARCH
COPY
AUDIO MODE

12

AUDIO SELECT

CAMERA
A/V
MEMORY
VIEWER

PLAYER MODE

REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE

12

SOUND[1]

AUDIO SELECT
WIND CUT

A / V SET

PB DSE

PHOTO Image Recording

1. Pulse el botón PHOTO y manténgalo pulsado.

Aparece la imagen fija en la pantalla LCD.

Si no desea grabarla, suelte el botón.

2. Suelte el botón PHOTO y púlselo de nuevo

pasados dos segundos.

La imagen fija se graba durante unos
6 o 7 segundos.

3. Tras grabar la fotografía, la videocámara vuelve

a la modalidad de espera (STBY).

Búsqueda de una fotografía

La función de búsqueda de fotografías (PHOTO SEARCH)
sólo opera en las modalidades PLAYER.

1.

Pulse el botón MENÚ (o el botón PHOTO
SEARCH del mando a distancia).

Aparece la lista del menú.

2. Gire el DIAL MENÚ hasta resaltar A/V.
3. Pulse el botón ENTER para acceder al

submenú.

4. Seleccione PHOTO SEARCH en el submenú y

pulse el botón ENTER.

5. Busque la fotografía mediante los botones

(FF) y

(REW).

El proceso de búsqueda de fotografías
aparece en la pantalla LCD durante la
búsqueda.

Una vez terminada la búsqueda, la
videocámara muestra la imagen fija.

6. Para salir, pulse el botón (STOP).

Grabación de imágenes fotográficas

00616D SCD23-USA+ESP (58~102) 5/15/03 10:59 AM Page 63

Advertising
This manual is related to the following products: