Samsung LS27B971DS-ZA - Manual (Page 27)

27
2. Start calibration.
• Select the connected calibrator, then click “Next.”
• Attach the calibrator to the indicated spot on the screen, then click “Next.”
NOTE
• Set the screensaver time to at least 30 minutes before starting measurement.
• The calibration process will be performed in full screen. To cancel a calibration that is in progress,
press the ESC key.
3. After calibration, you can compare the screens before and after the calibration using the
After / Before buttons.
Click “Save” to save the calibration results to Calibration on the monitor.
Using NCE (Natural Color Expert)