Samsung LS27B971DS-ZA - Manual (Page 32)

32
Connection using a Dual-link DVI cable (digital type)
DVI IN DVI OUT
1. Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on
the PC.
2. Connect the DC power adapter to the product and a power socket. Next, turn on the
power switch on the PC.
3. Press the [ ] button on the product to change the input source to DVI .
NOTE
• Open the SETUP&RESET menu. Next, set PC/AV Mode to PC .
• Audio is not available if the PC and product are connected via the DVI port.
Connection Using the DP Cable
DP IN DP OUT
1. Connect the DP cable to the DP IN port on the back of the product and the DP port on
the PC.
2. Connect the DC power adapter to the product and a power socket. Next, turn on the
power switch on the PC.
3. Press [ ] to change the input source to DisplayPort .
NOTE
• Open the SETUP&RESET menu. Next, set PC/AV Mode to PC .
Connecting and Using a Source Device