Samsung LS27B971DS-ZA - Manual (Page 28)

28
MHL (Mobile High-Definition Link)
Connect a mobile device that supports MHL to the product and view videos and photos (saved
on the device) using the product screen.
MHL
NOTE
• To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile device
is MHL certified on the website of the device manufacturer. To find a list of MHL-certified devices, visit
the official MHL website (http://www.mhlconsortium.org).
• To use the MHL function, the latest version of software must be installed on the mobile device.
• On some mobile devices, the MHL function may not be available depending on the device performance
or functionality.
• Since the display size of the product is larger than those of mobile devices, the picture quality may
degrade.
• This product is officially MHL-certified. In the event of a problem with a mobile device connection,
contact the mobile device manufacturer.
• The picture quality may degrade when content (imported from the mobile device) with a low resolution
is displayed on the product.
Using MHL
HDMI IN
(MHL)
1. Connect the HDMI IN(MHL) port on the product to the Micro USB port on the mobile
device using the mobile cable.
2. Connect the DC power adapter to the product and a power socket.
3. After the power is connected, the product will automatically detect and change the input
source.
* If the input source is not set to HDMI/MHL , press the [ ] button to change the input
source.
* If the screen is blank in HDMI/MHL mode, power the product off and then on again.
NOTE
Mobile devices should be purchased separately.
Using MHL
Chapter. 4