Samsung LS27B971DS-ZA - Manual (Page 34)

34
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the
product for the first time after purchase.
Select a language and change the resolution to the optimum value.
The optimal resolution for this monitor is as follows:
2560 x 1440 60Hz
Follow the above settings to set the resolution.
English
Exit Enter Move
1. Press [ ], [ ] to move to the language you want and press [ ].
2. To hide the information message, press [m].
NOTE
• If the optimal resolution is not selected, the message will appear up to three times for a specified
time even after the product is turned off and on again.
• The resolution can also be changed to the optimal setting (2560 x 1440) using Control Panel on your
PC.
Changing the Resolution Using a PC
NOTE
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel → Display → Settings and change the resolution.
Connecting and Using a Source Device