Samsung HT-E350-ZA - Manual (Page 15)

English
15
02
Connections
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker. (HT-E355 Only)
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.(HT-E355 Only)
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
nec
tio
ns
Black Red
In case of HT-E350
Front Speaker (R)
Subwoofer
Surround Speaker (R) Surround Speaker (L)
Front Speaker (L)
Center Speaker
SURROUND SURROUND SUBWOOFER
CENTER FRONT FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
AUX IN
HDMI OUT
VIDEO OUT FA NET (Only For Service)
Connecting the wall mount
1. Connect the speaker cord with the colour
tube to (+), and the speaker cord without the
colour tube to (–).
2. Prepare screws (not supplied) that are suitable
for the hole on the back of each speaker.
See the illustrations below.
3. Fasten the screws to the wall, then hang the
speaker on the wall.
Colour tube
Front left speaker (L) : White
Front right speaker (R) : Red
Center speaker : Green
Surround left speaker (L) : Blue
Surround right speaker (R) : Gray
5 mm
10 mm
Hole on the back of the speaker
30 mm
4 mm
8 to 10 mm
Depth of fastened screw