Samsung HT-E350-ZA - Manual (Page 23)

English
23
03
Setup
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Home Theater/TV Speaker.
• Home Theater : Video is transmitted over the
HDMI connection cable only, and
audio is output through the product
speakers only.
• TV Speaker : Both video and audio signals are
transmitted over the HDMI connection
cable, and audio is output through
your TV speakers only.
✎
NOTE
 The default setting of this function is Home
Theater .

HDMI Audio is automatically down-mixed to 2ch
for TV speakers.

When TV Selection is set to TV Speaker, PL II /
DSP EQ/P.BASS/GIGA doesn't work.

With Speaker Selection set to 'TV Speaker', the
volume can be adjusted only using the TV remote
control.
User EQ
You can configure the equalizer settings manually to
your preference.
Settings
mMove " Select ' Return
a Reset > Adjust < Move ' Return
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz
Audio Return Ch.(ARC)
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
• Off : Turn the Audio Return Channel function off.
• Auto : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.
✎
NOTE

When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.

Using an ARC (Audio Return Channel)-
uncertified HDMI cable may cause a problem in
compatibility.

ARC function is only available if an ARC-
compliant TV is connected.
System
Initial Settings
By using the Initial Settings, you can set the language
and TV aspect .
✎
NOTE
 If an HDMI cable is connected to the product,
the TV aspect does not appear and it is set to
16:9 Wide automatically.