Samsung LS23PTNSF-ZA - Manual (Page 35)

Using the Product 3-4
Eco Solution You can choose various options of <Energy Saving> features.
• <Energy Saving >
You can reduce the power consumption by adjusting the screen brightness.
•
<Off> - <Low> - <Medium> - <High> - <Picture Off> - <Auto>
• If you select <Picture Off>, the screen is turned off, but the sound remains on.
Press any button except volume button to turn on the screen.
• Not available in PC/HDMI PC timing.
• <No Signal Power Off>
Saves power by turning the TV off when no signal is received from any source.
•
<Off> - <15 min> - <30 min> - <60 min>
Disabled when the PC is on DPM(Display Power Management).
Auto Adjustment The values of <Fine>, <Coarse> and <Position> are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
Available only <PC> mode.
Press the [TOOLS] button to display the Tools menu. You can also set the <auto adjustment> by
selecting <Tools> → <Auto Adjustment>.
Screen • <Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using
the horizontal control menu.
• <Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency (<Coarse>).
• <Position>
Adjusts the screen location horizontally and vertically.
• <Image Reset>
Image parameters are replaced with the factory default values.
Available only <PC> mode.
Picture Options • <Color Tone>
The tone of the color can be changed.
• Available only <PC> mode.
• Not available when <MagicBright> is <Dynamic Contrast>.
• <Cool> - <Normal> - <Warm> - <Custom>
• <R-Gain > - < G-Gain > - <B-Gain >
Adjusts the individual R, G, B (Red, Green, Blue) color controls.
Not available when <MagicBright> is <Dynamic Contrast>.
• <Size>
You can switch the Size.
•
<16:9> - <4:3>
Picture Reset Picture parameters are replaced with the factory default values.
• <OK> - <Cancel>
MENU DESCRIPTION