Samsung LS23PTNSF-ZA - Manual (Page 42)

3-4 Using the Product
Channel
MENU DESCRIPTION
Antenna You can select antenna or cable TV.
If [ANT IN] connected, select the antenna input you want. If the antenna input is not selected prop-
erly, noise may appear on the screen.
• <Air> - <Cable>
Auto Program The TV automatically cycles through all of the available channels and stores them in memory.
In rare cases, <Auto program> may miss a few channels due to weak signals and the channels may
not be added to the channel memory.
• <Antenna Source> - Select the Antenna source to memorize.
•
<Air> - <Cable> - <Auto>
• <Digital Cable System> - Select the digital cable system.
•
<STD> - <HRC> - <IRC>
• <Analog Cable System> - Select the analog cable system.
•
<STD> - <HRC> - <IRC>
• When selecting the Cable TV system: <STD>, <HRC> and <IRC> identify various types of
cable TV systems. Contact your local cable company to identify the type of cable system
that exists in your particular area. At this point, the signal source has been selected.
• After all the available channels are stored, it starts to remove scrambled channels. The
<Auto program> menu then reappears.
Clear Scrambled
Channel The <Clear Scrambled Channel> function is used to filter out scrambled channels after <Auto Pro-
gram> is completed. It removes the scrambled channels from the list by tuning the digital cable chan-
nels.
This process may take up to 20~30 minutes.
This function is only available in <Cable> mode.