Samsung CLP-300N-XAA - Manual (Page 15)

Setting Up Your Printer
2.2
Installing the Toner Cartridges
1
Open the front cover.
2
Pull and remove the paper protecting the imaging unit.
3
Remove four dummy caps which are on the toner cartridge
entrances of the imaging unit. When you remove the dummy
cap from the cartridge, lift the handle up and pull it out.
C AUTION : If you force too much to the dummy caps, it may
cause problem.
4
Holding the toner cartridges, shake thoroughly them from
side to side to distribute the toner.
5
Remove the cartridges cap.
N OTE : If toner gets on your clothing, wipe it off with a dry cloth
and wash it in cold water. Hot water sets toner into fabric.
6
On the imaging unit of the printer, labels identify which
color cartridge goes into each cartridge slot.
Cyan
Magenta
Yellow
Black