To select the source, To edit the input source name, Using automatic picture settings – Samsung TXT2082X-XAA User Manual
Page 11
English - 11
To Select the Source
Use to select TV or other external input sources such as DVD players, VCRs, etc. connected
to the TV.
1 Press the MENU button to display the menu.
Press the
ENTER button to select Input.
2 Press the ENTER button to select Source List.
Press the ▲ or ▼ button to select signal source, then press the
ENTER button.
➢
You can choose between the following sets of jacks:
TV, AV1, or Component on the
TV’s rear panel and
AV2 on the TV’s side panel.
Press the
SOURCE button on the remote control to view an external signal source.
In TV(Analog) mode:
TV → AV1 → AV2 → Component
In DTV(Digital) mode:
DTV → AV1 → AV2 → Component
➢
To check the input signals displayed, press the
INFO button on the remote control.
To Edit the Input Source Name
Name the external device connected to the input jacks to make your input source selection
easier.
1 Press the MENU button to display the menu.
Press the
ENTER button to select Input. Press the ▲ or ▼ button to select Edit Name, then
press the
ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, or Component input jack, then press the
ENTER button.
3 Press the ▲ or ▼ button to select VCR, DVD, Cable STB, Sat. STB, AV Receiver,
DVD Receiver, Game, Camcorder, or DVD Combo input source, then press the ENTER
button.
Press the
EXIT button to exit.
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”)
that are preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select
Picture, then press the ENTER button.
2 Press the ENTER button to select Mode.
Press the
ENTER button again. Press the ▲ or ▼ button to select the Dynamic, Standard,
Movie, or Custom picture setting, then press the ENTER button.
Choose
Dynamic for viewing the TV during the day or when there is bright light in the
room.
Choose
Standard for general TV watching mode.
Choose
Movie when watching movies.
Choose
Custom if you want to adjust the settings according to personal preference.
Press the
P.MODE button on the remote control to select one of the standard picture
settings.
Continued...
Move
Enter
Return
Source List
TV
DTV
AV1
- - - -
AV2
- - - -
Component - - - -
Move
Enter
Return
Edit Name
AV1
:
- - - -
AV2
: - - - -
Component : - - - -
----
VCR
DVD
Cable STB
Sat. STB
AV Receiver
DVD Receiver
▼
Move
Enter
Return
Mode
Mode
: Dynamic
Contrast
:
100
Brightness
:
50
Sharpness
:
75
Color
:
50
Tint
: G 50 R 50
Color Tone
: Cool1
Reset
Dynamic
Standard
Movie
Custom
AA68-03783D-01Eng.indd 11
2007-02-09 ｿﾀﾀ・10:22:49