Samsung TXT2082X-XAA - Manual (Page 7)

English - 7
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system(according to the
instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.
➢  Each VCR has a different back panel configuration.
 When connecting a VCR, match the color of the connection terminal to the cable.
1 Unplug the cable or antenna from the back of the TV.
2 Connect the cable or antenna to the ANT IN terminal on
the back of the VCR.
3 Connect an Antenna cable between the ANT OUT terminal
on the VCR and the ANT IN (AIR/CABLE) terminal on the
TV.
4 Connect a Video Cable between the VIDEO OUT jack on
the VCR and the AV IN 1 [VIDEO] jack on the TV.
5 Connect Audio Cables between the AUDIO OUT jacks on
the VCR and the AV IN 1 [L-AUDIO-R] jacks on the TV.
➢ If you have a “mono” (non-stereo) VCR, use a
Y-connector(not supplied) to hook up to the right and
left audio input jacks of the TV. If your VCR is stereo,
you must connect two cables.
➢ Also, you can connect to AV IN 2 on the side panel of TV.
Rear of the TV
VCR
Audio Cable
(Not supplied)
5
Video Cable(Not supplied) 4
Antenna cable(Not supplied) 3
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
➢  Each Camcorder has a different back panel configuration.
 When connecting a Camcorder, match the color of the connection terminal to the cable.
1 Connect a Video Cable between the AV IN 2 [VIDEO] jack
on the TV and the VIDEO OUT jack on the camcorder.
2 Connect Audio Cables between the AV IN 2
[L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks
on the camcorder.
Side of the TV
Camcorder
Video Cable(Not supplied) 1
Audio Cable(Not supplied) 2
2
AA68-03783D-01Eng.indd 7 2007-02-09 ｿﾀﾀ・10:22:44