Samsung LS17HAHTS2-XAZ - Manual (Page 45)

(The maximum frequency per
resolution may differ from product to
product.)
There are only
16 colors shown
on the screen.
The screen
colors have
changed after
changing the
video card.
Have the Windows colors
been set properly? Windows ME/2000/XP:
Set the colors properly at the
Control Panel → Display →
Settings.
Has the video card been
set properly? Set the video card by referring to the
video card manual.
There is a
message that
reads
"Unrecognized
monitor, Plug &
Play (VESA
DDC) monitor
found".
Have you installed the
monitor driver?
Install the monitor driver according
to the Driver Installation Instructions .
See the video card manual
to see if the Plug & Play
(VESA DDC) function can
be supported.
Install the monitor driver according
to the
Driver Installation Instructions .
Check when
MagicTune™
does not
function
properly.
MagicTune™ feature is
found only on PC (VGA)
with Window OS that
supports Plug and Play.
* To check whether your PC is
available for MagicTune™ feature,
follow the
steps below (When Windows is
XP);
Control Panel -> Performance and
Maintenance -> System ->
Hardware -> Device Manager ->
Monitors -> After deleting Plug and
Play monitor, find 'Plug and Play
monitor' by searching new
Hardware.
MagicTune™ is an additional
software for the monitor. Some
graphic cards may not support your
monitor. When you have a problem
with the graphic card, visit our
website to check the compatible
graphic card list provided.
http://www.samsung.com/monitor/magictune
MagicTune™
doesn't work
properly. Have you changed your
PC or video graphic card? Download the latest program. The program can be
downloaded
http://www.samsung.com/monitor/magictune .
Did you install the
program? Reboot the computer after installing
the program for the first time. If a
copy of the program is already
installed, remove it, reboot the
computer, and then install the
program again. You need to reboot
the computer for it to operate
normally after installing or removing
the program.
Visit the MagicTune™ website and download the installation software for MagicTune™
MAC.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz.
(Do not exceed 75 Hz when using the maximum resolution.)