Samsung HT-A100T-XAA - Manual (Page 18)

1
connections
CONNECTINg THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
METHOD3
(supplied) METHOD2 METHOD1
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack
on your TV.
METHOD 2 : Component Video
If your television has Component Video inputs, connect a Component video cable(not supplied) from the
Component Video Output (P
R
, P
B
and Y) jacks on the back of the DVD Player to the Component Video
Input jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the
VIDEO IN jack on your TV.
The resolution from the Component Output is 480i(576i).
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater using the TV's
remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).
Please check the
logo (If your TV has an logo, then it supports the Anynet+ function.)
M
`
`
`
02056S-HT-A100-XAC-ENG.indd 18 2008-03-18 �� 11:56:17