Samsung BD-D5100-ZA - Manual (Page 8)

8
Front Panel
1
DISC TRAY Opens to accept a disc.
2 REMOTE CONTROL
SENSOR
Detects signals from the remote control.
3
DISPLAY Displays the playing status, time, etc.
4
OPEN/CLOSE BUTTON Opens and closes the disc tray.
5
PLAY/PAUSE BUTTON Plays a disc or pauses playback.
6
USB HOST
You can connect a USB memory flash stick here and use it as storage
when the player is connected to BD-LIVE. You can also use the USB Host
for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.
7
POWER BUTTON Turns the player on and off.
8
STOP BUTTON Stops disc playback.
✎ NOTE
You can perform software upgrades using the ▪ USB Host jack with a USB memory flash stick only.
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on ▪
the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then
press the ENTER button.
a
b c d e f
g h
Rear Panel
1
LAN
Use for network based services, BD-LIVE, and software upgrades using
a network connection.
2
HDMI OUT
Using an HDMI cable, connect this HDMI output terminal to the HDMI
input terminal on your TV for the best quality picture or to your AV
receiver for the best quality sound.
3
DIGITAL AUDIO OUT Connects to an AV receiver.
4
VIDEO OUT Connects to the video input of external devices using a video cable.
5
AUDIO OUT Connects to the audio input of external devices using audio cables.
b c a
ed