Asus Motherboard P5RD1-V - Manual (Page 120)

5 - 2 0 5 - 2 0 5 - 2 0 5 - 2 0 5 - 2 0 C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
Creating a RAID 0+1 configuration Creating a RAID 0+1 configuration Creating a RAID 0+1 configuration Creating a RAID 0+1 configuration Creating a RAID 0+1 configuration
To create a RAID 0+1 set:
1.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e R A I D 0 + 1 S t r i p i n g , M i r r o r i n g
C r e a t e R A I D 0 + 1 S t r i p i n g , M i r r o r i n g C r e a t e R A I D 0 + 1 S t r i p i n g , M i r r o r i n g C r e a t e R A I D 0 + 1 S t r i p i n g , M i r r o r i n g C r e a t e R A I D 0 + 1 S t r i p i n g , M i r r o r i n g then press <Enter>.
2. The utility prompts the following warning message:
Data on first 4 drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to menu.
3. Key-in a RAID name composed of a maximum of eight (8)
alpha-numeric characters then press <Enter>. Special characters or
symbols are not allowed.
4. The utility displays the RAID Array settings at the bottom of the
screen.
Creating a JBOD configuration Creating a JBOD configuration Creating a JBOD configuration Creating a JBOD configuration Creating a JBOD configuration
To create a JBOD set:
1.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e J B O D f o r i n t e g r a t e d c a p a c i t y
C r e a t e J B O D f o r i n t e g r a t e d c a p a c i t y C r e a t e J B O D f o r i n t e g r a t e d c a p a c i t y C r e a t e J B O D f o r i n t e g r a t e d c a p a c i t y C r e a t e J B O D f o r i n t e g r a t e d c a p a c i t y then press <Enter>.
2. Use the up or down arrow keys to select a drive then press <Space>
or <Enter>. The striped mark “J” appears before a selected drive.
3. Repeat step 2 to select the second drive.
4. The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to menu.
5. Key-in a RAID name composed of a maximum of eight (8)
alpha-numeric characters then press <Enter>. Special characters or
symbols are not allowed.
6. The utility displays the RAID Array settings at the bottom of the
screen.