Samsung SGH-X496ZSAGEN - Manual (Page 160)

Sect
ion 4
160
Change PIN
This feature lets you change your current PIN.
Note: You must enable the PIN Check feature before using this feature.
See “PIN Check” on page 159 for more information.
You must enter the current PIN before you can specify a
new one.
1. In Idle mode, press the Menu (left) soft key ( ), then
press (for Settings), (for Security), and
for Change PIN. Either a Warning message or the
Change PIN screen appears in the display.
If the “PIN Check Must Be Enabled” warning message
appears in the display followed by the Security menu,
use the navigation keys to highlight PIN Check, then
press the Select (left) soft key (
) or press key.
(See “PIN Check” on page 159 for more information.)
Otherwise, the Change PIN screen appears in the
display, prompting you to enter your current PIN.
2. Use the keypad to enter your PIN, then press the OK (left)
soft key ( ) or press key.
Note: If you enter a PIN incorrectly three times, the PIN is disabled and you
must obtain a PIN Unblocking Key (PUK) from Customer Service and enter
it.
You are prompted to enter your new PIN.
3. Use the keypad to enter your new PIN, then press the OK
(left) soft key ( ) or press key.
You are prompted to confirm new PIN.