Samsung WF405ATPAWR-A2 - Manual (Page 24)

24_ washing a load of laundry
washing a load of laundry
Deactivating the Child Lock function
Press and hold both the Soil level and Signal buttons simultaneously for approximately 6 seconds.
• When you deactivate the Child Lock function, the door is unlocked and the “Child Lock ” is turned off.
• The Child Lock function prevents children or the infirm from accidently operating the washer and
injuring themselves.
• If a child enters the washing machine, the child may become trapped and suffocate.
• Once you have activated the Child Lock function, it continues working even if the power is turned
off.
• Opening the door by force can result in injury due to damage to the product.
To add laundry after you have activated the Child Lock function, you must first pause or deactivate the
Child Lock function.
If you want to open the door of the washing machine when the Child Lock function is activated:
• Pause or deactivate the Child Lock function.
• Turn the washing machine off and then on again.
Spin Only
If you press the Power button and then press and hold the Spin button for 2 seconds, the spin
time will be displayed on the display panel.
Then, press the Spin button repeatedly until the required spin level is selected, and then press
the Start/Pause button.
Before pressing the Spin Only button to use the Spin Only function, you can select a cycle
with the Cycle Selector. If you have selected a cycle, you can only select the spin level
corresponding to the selected cycle.
Garment+
You can add or take out laundry items even after the wash has started, as long as the
“Garment+ ” light is on. Pushing the Start/Pause button unlocks the door, unless the water is
too hot or if there is too much water in your washer. If you are able to unlock the door and wish
to continue the wash cycle, close the door, and then press the Start/Pause button.
Delay Start
You can set the washing machine to start your wash automatically at a later time, choosing a delay time.
The hour displayed indicates the time at which the wash will be started.
1. Set your wash course.
2. Press the delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay Start ” indicator will be lit, and the clock will begin
counting down until it reaches the set time.
4. To cancel a Delay Start function, press the Power button and then turn the washing machine on again.
WARNING
CAUTION
WF405ATPA-03145A-08_EN.indd 24 2013-12-13 10:12:45