Samsung WF405ATPAWR-A2 - Manual (Page 26)

26_ washing a load of laundry
DEEP STEAM
DEEP STEAM (Magic Steam)
The Deep Steam feature boosts cleaning performance and loosens grime and dirt, providing superior
cleaning results.
For heavily soiled, colorfast garments, this cycle provides a high washing temperature and steam and is
effective for cleaning stains.
How DEEP STEAM works
If you select steam, the steam acts at the most effective times for the detected amount of laundry,
maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and
improving wash performance.
Press Steam button to use the Steam Wash function. Steam Wash is available with the Normal, Heavy
Duty, Bedding PLUS, Sanitize, Stain Away and Deep Steam cycles. For heavily soiled, colorfast garments,
Steam Wash improves stain treatment and uses less water.
Washer takes small amounts of water in tub and Heater heats water into evaporation.
To use the Steam function, perform the following steps:
1. Load the washer.
2. Press the Power button.
3. Turn the Cycle Selector and select a Steam Cycle. (The Deep Steam course automatically selects
Steam.)
4. Press the Steam button.
5. Add detergent to the dispenser tray and add fabric softener up to the marked line.
6. Press the Start/Pause button.
The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
The steam may not be visible during the Steam cycle, and may also not always be visible while the
total steam cycle is being performed.
This is normal.
• Too much steam could damage clothing. Do not use steam with delicate fabrics such as wool, silk
or easily discolored fabrics.
• Steam may not be present during entire steam wash cycle.
• Do not touch the door. The door surface can become very hot.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles of clothing one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Eco Cold, Normal, Heavy Duty, Perm Press,
Sanitize, Stain Away, Deep Steam, Active Wear and Bedding PLUS cycles. It is only
necessary if your clothing is heavily soiled.
CAUTION
washing a load of laundry
WF405ATPA-03145A-08_EN.indd 26 2013-12-13 10:12:47