Reconnect a bluetooth headset or car kit – Samsung SPH-D710AAABST User Manual
Page 123
109
B
luetooth
If automatic pairing fails
ᮣ
Enter the passcode supplied with your headset.
The pairing and connection status displays below the
hands-free headset or car kit name in the Bluetooth
devices section. When the Bluetooth headset or car kit
is connected to your phone,
(Bluetooth connected)
displays in the status bar. Depending on the type of
headset or car kit connected, you can begin using the
headset or car kit to listen to music or make and
receive phone calls.
Reconnect a Bluetooth Headset or Car Kit
When you have paired a headset with your phone, the
headset should automatically reconnect when you turn
it on. However, sometimes you will need to reconnect
manually, for example if you were using your headset
with another Bluetooth device.
1.
Press
and tap
> Settings > Bluetooth
.
2.
If Bluetooth is not on, tap the Bluetooth OFF/ON
slider
to turn it on.
3.
Make sure that the headset is set to discoverable
mode.
4.
Tap the headset’s name in the Bluetooth devices
section.
5.
If prompted to enter a passcode, try 0000 or 1234,
or consult the headset or car kit documentation to
find the passcode.
6.
If you still cannot reconnect to the headset or car
kit, follow the instructions in “Disconnect or Unpair
from a Bluetooth Device” on page 110, then follow
the instructions in “Connect a Bluetooth Headset
or Car Kit” on page 108.
Note:
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
ON