Samsung SC-D382-XAA - Manual (Page 37)

English _ 29
Demonstration automatically shows you the major functions that are included with
your camcorder so that you may use them more easily.
The demonstration function may only be used in the Camera mode without a tape
inserted in the camcorder. ➥page 18
Before you begin: Make sure that there is no tape inserted in the camcorder.
➥
page 34
The demonstration operates repeatedly until the demonstration mode is switched off.
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera (
).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick ( ▲ / ▼ ) up or down to select "System", then press the
Joystick or move the Joystick ()to the right.
5. Move the Joystick ( ▲ / ▼ ) up or down to select "Demonstration", then press
the Joystick.
6. Move the Joystick ( ▲ / ▼ ) up or down to select "On", then press the Joystick.
7. Press the MENU button.
The demonstration will begin.
8. To quit the demonstration, press the MENU button.
The demonstration function is automatically activated when the camcorder
is left idle for more than 10 minutes after switching to the Camera mode
(if no tape is inserted in the camcorder).
If you press other buttons (MENU, Joystick, EASY.Q...) during the
demonstration mode, the demonstration stops temporarily and resumes
10 minutes later if you do not operate any other functions.
The demonstration mode displays in 4:3 aspect ratio on the LCD screen.
•
•
•
•
•
•
•
•
•
VIEWINGTHEDEMONSTRATION(DEMONSTRATION)
BATT.
CHG
MODE TAPE CARD
Move Select Exit
Remote
Beep Sound
Shutter Sound
Language
Demonstration
Camera Mode
MENU
System
Clock Set
Off
✔ On
Move Select Exit
Remote
Beep Sound
Shutter Sound
Language
Demonstration
Camera Mode
MENU
System
Clock Set
� On
� On
� On
� English
� On
SAMSUNG Camcorder is...
Demonstration
34x Optical Zoom
1200x Digital Zoom
Multi-Visual Effect
(SC-D383/D385 only)