Voice, Using the voice+ function – Samsung SC-D382-XAA User Manual

Page 79

Advertising
background image

English _

71

USing the Voice+ FUnction

The Voice+ function works only in

Player mode. ➥ page 18

When copying (dubbing) a tape recorded on the camcorder to another AV device, you can dub your voice through the

camcorder's internal microphone to the device, instead of the existing audio on the recorded tape.

1. Connect the provided Audio/Video cable

to the AV Jack of the camcorder.

2. Connect the other end of the cable to the

VCR/DVD Recorder/TV by matching the

colors of the terminals.

3. Set the Select switch to

TAPE

.

(SC-D383/D385 only)

4. Press the MODE button to set

Player (

).

5. Insert the tape you wish to play back

in this camcorder.

6. Press the recording start/stop button

at a desired point during playback.

Voice+ ( ) indicator is displayed

on the screen and

"VOICE+" will

flicker on the screen for a while.

Sound incoming from the internal

microphone will be transferred to the connected

AV device, instead of the pre-recorded sound on the tape.

7. To cancel the function, press the recording start/stop button again.

Voice+ is available only when the Audio/Video cable is connected. If a different cable

(DV or USB cable (SC-D383/D385 only)) is connected, Voice+ function may not operate

properly.

If you move the

Joystick (///) when you operate Voice+ function, Voice+ function

will be deactivated.

During the Voice+ process, the

MENU and PHOTO button functions do not work.

The Voice+ function does not affect the original sound on the recorded tape.

Sound is transferred from the internal microphone on this camcorder to the connected AV

device, when using the Voice+ function. So make sure that this microphone is not blocked.

Adjust the sound volume on the connected external device. (TV, etc.)

Feedback may occur if you move the camcorder too close to the speaker of the external

device.

Before connecting, make sure that the volume on the external device is turned down.

Forgetting this may cause feedback from the external device's speakers.




MIX[1+2]

16BIt

S

AV In

12:00 1.JAN.2008

0:00:20:23

60min

SP

MIX[1+2]

16Bit

S

AV In

12:00 1.JAN.2008

0:00:20:23

60min

SP

Voice+

AV

MODE

DV

POWER

CHG

AV Jack

Audio/Video Cable

VCR

TV

Advertising
This manual is related to the following products: