Avaya 555-233-784 - Manual (Page 59)

Changing the Display Contrast
Issue 4 November 2006 59
Changing the Display Contrast
On first-time startup, your 4610SW IP Telephone’s display area contrast is set to a mid-level. To
adjust it to better suit your work environment and lighting, 15 contrast levels are available.
Note:
Note:
You might not be able to distinguish between all 15 contrast level settings. Some
of the upper and/or some of the lower contrast level settings may appear identical
to adjacent settings. This is normal.
1. Select the Contrast Control option from the Options Main screen (accessed by pressing
the phone’s Option button).
2. To brighten the contrast, press the Right Arrow softkey until you reach the desired
contrast level. To dim the contrast, press the Left Arrow softkey until you reach the desired
contrast level.
Each softkey press results in the level being increased or decreased, depending on which
arrow softkey you press. Chevron symbols provide visual confirmation of the current level.
3. Save the contrast level you set by pressing the Save softkey, or, to restore the previous
setting without changing the contrast, press the Cancel softkey.
The second Options Main screen displays.
Feature Button Labeling
Line/Feature buttons ( ) appear on both sides of the telephone’s display area. These buttons
provide call appearances (Lines). These buttons also provide other call-related features
(provided with your telephone system or administered by your System Administrator) in the
Phone application. Line/Feature buttons also serve as application-specific buttons in other
applications, such as the Call Log.
You can use the Feature Button Labeling option to re-label any of the Phone application Feature
buttons. For example, one of your Feature buttons may be labeled CFwd for Call Forwarding
but you want it to read simply Fwd. Alternatively, if you have re-labeled several Feature buttons
and want to restore the default (original) labels, this option lets you view the default label values
and restore them if desired.
1. Select Feature Button Labeling on the second Options Main screen.
The Feature Button Labeling Options screen displays.