Samsung SPH-D710ZKASPR - Manual (Page 185)

Settings 173
 Double tap to top: Lets you double tap the top of the phone to be taken to the top of
the current onscreen list.
 Tilt to zoom: Once enabled, you must be on a screen where content can be
zoomed. In a single motion, touch and hold two points on the display and then tilt the
phone back and forth to zoom in or out.
 Pan to move icon: Once enabled, touch and hold a desired application shortcut icon
or widget on the screen. Once it detaches, move the phone left or right to migrate it
to a new location.
 Pan to browse images: Once enabled, touch and hold a desired onscreen image to
pan around it. Move the phone left or right to pan vertically or up and down to pan
horizontally around the large onscreen image.
 Shake to update: Once enabled, shake your phone to rescan for Bluetooth phones,
rescan for Wi-Fi phones, Refresh a Web page, etc.
 Turn over to mute/pause: Once enabled, mute incoming calls and any playing
sounds by turning the phone over display down on a surface. This is the opposite of
the pickup to be notified gesture.
 Sensitivity settings: Follow the prompts to calib rate the phone’s gyroscope. The
response sensitivity of certain motions may also be adjusted.
 Learn about motions: Read descriptions and follow example of using motions.
Accessory Settings
This feature allows you to set certain actions to be performed whenever your phone is inserted
or removed from its dock.
1. Press > and tap Settings > Accessory.
2. Tap Dock sound to enable/disable sounds to play when inserting and removing the
phone from the dock.
3. Tap Audio output mode to use external dock speakers when the phone is docked.
4. Tap Desk home screen display to display the desk home screen when the phone is
docked.
5. Tap Audio output to select between Stereo or Surround.
6. Tap Audio applications to enables audio applications to be displayed in the quick panel
whenever earphones are connected.