Samsung SPH-D710ZKASPR - Manual (Page 52)

Phone Calls 40
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
●
Mute: Mute the microphone during an active call. Tap again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
● Headset: Route the phone’s audio through a connected Bluetooth headset (On) or
through the speaker (Off).
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.
 To route the current call back to the phone, tap Headset to temporarily use the
phone. Tap it again to route the call back to the connected Bluetooth headset.
 When Bluetooth or the Bluetooth headset is turned off, the call is routed through
either the earpiece or speaker.
●
Press during a call to display a list of additional in-call features. Tap an option to
select it.
 Contacts: Display your contacts list.
 Message: Send a message to the caller.
Set Up Speed Dialing
Your phone can store
contacts’ phone numbers as speed dials. To use a speed dial, enter the
speed dial number using the phone keypad, holdin g down on the last digit. The contact’s default
phone number assigned to the speed dial will be dialed.
Assign a Speed Number to a Contact
1. Press and tap . Enter a phone number.
2. Press and tap Speed dial setting.
3. Select a speed dial number to use for the phone number.
4. The Select contact menu displays. Tap any contact.
5. The contact’s default phone number will be assigned to speed dial number.
Note: If you assign a number to an already in-use speed dial location, the new phone number
will automatically replace the previous speed dial assignment.