ADIC Scalar 1000 - Manual (Page 7)

Control Module and 2 - 12 552 38.6TB 55.2TB
1 Expansion Module 14 - 24 492 34.4TB 49.2TB
Control Module and 2 - 12 867 60.7TB 86.7TB
2 Expansion Modules 14 - 24 807 56.5TB 80.7TB
26 - 36 747 52.3TB 74.7TB
Control Module and 2 - 12 1182 82.7TB 118.2TB
3 Expansion Modules 14 - 24 1122 78.5TB 112.2TB
26 - 36 1062 74.3TB 106.2TB
38 - 48 1002 70.1TB 100.2TB
1 AIT drives offered in pairs.
2 With 2:1 compression. Capacities specified use 230m media. For
170m media reduce capacity by 28.6%.
3 With 2:1 compression.
Control Module 2 - 12 237 16.6TB 23.7TB
five
AIT Guidelines
Drive Cartridge
Bays Capacity
Control Module 12 237
Expansion Module 0 315
12 255
Scalar 1000 / AIT
AIT Capacity Guidelines
B UILDING B LOCKS OF A S CALAR 1000 / AIT L IBRARY
The Scalar 1000 / AIT control module, which
can also serve as a self-contained library, is config-
ured with 12 AIT drive bays. Each expansion mod-
ule is configured for tape storage only (no drive
bays), or with 12 drive bays.
Choice of drive bay configuration determines the
tape positions available in each module (see table).
Drives to populate drive bays are ordered separately
and may be easily added on-site. Configuration
change is easy since the drive bay and cartridge ca-
pacity of any module can be easily reconfigured in
the field. The Scalar 1000 automatically “reteaches”
the library’s settings to reflect new configurations.
AIT1 AIT2
Library Drive Cartridge Storage Storage
Configuration Count 1 Capacity Capacity 2 Capacity 3
Scalar 1000 / AIT