Samsung LS17TRTLSY-XAA - Manual (Page 64)

Check when
MagicTune™ does
not function
properly. MagicTune™ feature
is found only on PC
(VGA) with Window
OS that supports
Plug and Play. * To check whether your PC is available for
MagicTune™ feature, follow the steps below (When
Windows™ is XP);
Control Panel → Performance and Maintenance →
System → Hardware → Device Manager → Monitors
→ After deleting Plug and Play monitor, find 'Plug and
Play monitor' by searching new Hardware.
MagicTune™ is an additional software for the monitor.
Some graphic cards may not support your monitor.
When you have a problem with the graphic card, visit
our website to check the compatible graphic card list
provided.
http://www.samsung.com/monitor/magictune
MagicTune™
doesn't work
properly. Have you changed
your PC or video
graphic card? Download the latest program. The program can be
downloaded
http://www.samsung.com/monitor/magictune
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
Symptom Solutions
The screen does
not appear when I
switch to the Client
Mode. To use the network function, approximately 30 seconds of booting time is
required after turning the power on, and a blank screen appears for 3 to 4
seconds during booting.
Please switch the mode about 30 seconds after the power is turned on.
The client screen
appears, but I
cannot connect to
the server. 1) Check if the Hub port LED to which the LAN cable is connected blinks. If not,
that indicates that the LAN connection is disconnected. In this case, connect
using another LAN cable.
2) Check if the settings of the 'Settings', 'Network' tab are properly set up. The
default setting is "DHCP". If your network uses a static IP address, select 'Use
the following IP address' and then enter the appropriate IP address information.
3) Check if the 'User Name' and 'Password' set in the 'Remote Desktop' tab of
'Settings' are the same as those of the host PC. If not, match the 'User Name'
and 'Password' of the 'Remote Desktop' with those of the host PC.
I cannot access the
Internet in the
Client screen. 1) Check if the Hub port LED to which the LAN cable is connected blinks. If not,
that indicates that the LAN connection is disconnected. In this case, connect
using another LAN cable.
2) Check if the settings of the 'Network' tab of 'Settings' have been properly set
up. The default setting is "DHCP". If your network uses a static IP address,
select 'Use the following IP address' and then enter the appropriate IP address
information.
The contents
(video, voice) on
the server do not
play smoothly on
the Client Monitor. This is because the data is transmitted over the LAN. Check your LAN
connection status.
I have connected a
digital device such
as a digital camera,
camcorder or USB
memory to the USB
port, but they do
not work. This model supports USB devices that support removable disk functions without
an additional driver installation. Check if the device you want to connect to is a
device that supports the removable disk function without an additional driver
installation.
The file list does
not appear. 1) Check the files on the card. If only abnormal files (e.g. 0KByte, broken JPEG)
exist, the files do not appear on the screen.
2) The time required to display is determined by the size of the file. Wait a
moment.